How to use Cert.

Using Cert. on Surfaces and Floors

Cert. is both a disinfectant and detergent, so you can use it in place of your current household cleaner, safe in the knowledge that Cert. kills 99.99% of microorganisms and household germs and destroys the SARS-CoV-2 virus, which causes COVID-19.

Like all powerful cleaning products Cert. needs to be treated with care. We recommend you clean with Cert. regularly and use the Cert. Trigger Spray and Cert. Spray Mop with your Cert. tablets.

How to use the Cert. Trigger Spray

1. Fill the spray bottle with 500ml of tap water (to the neck of the bottle). Drop in 1 Cert. tablet, replace and tighten the cap firmly. Wait for the effervescent tablet to fully dissolve (the water will be completely clear of tablet particles). Gently shaking the bottle will help the tablet to dissolve more quickly. Push the white safety button to unlock. Your hospital-grade cleaning solution is now ready to use.

2. Cert. is optimised to be used on hard surfaces in kitchens, bathrooms and all general living areas and workspaces. Once the Cert. tablet has fully dissolved, clean loose debris from surfaces and spray evenly onto the surface.

3. Using a clean cloth, dampened with some Cert. solution, gently wipe the surface to ensure the solution is spread across the whole surface. To remove any potential SARS-COV-2 contamination, leave the solution on the surface for 1 minute. For any other contamination leave for a further 4 minutes, after which time it can be left to dry, any remaining solution can be wiped away.

4. For direct food contact surfaces, such as chopping boards, 5 minutes after using Cert. rinse surface with clean water and allow to air dry or wipe with a disposable paper towel.

Your Cert. solution is active for 48 hours. Dispose of any leftover solution into a toilet bowl and flush.

How to use the Cert. Spray Mop

1. We recommend you use the Cert. Spray Mop. If you are using your own mop, use 1 Cert. tablet for every 500ml of tap water. Wait a few minutes for the tablet to fully dissolve (the water will be completely clear of tablet particles).

 

2. Once the Cert. tablet has fully dissolved, sweep loose debris from the floor and spray evenly onto the floor. Use the mop head to spread the solution evenly across the whole floor, taking care not to wipe the solution away with the mop head.

3. Leave the solution on the floor for 5 minutes, after which time it can be left to dry.  

Your Cert. solution is active for 48 hours. Dispose of any leftover solution into a toilet bowl and flush.